quadient IS-350 Скачать руководство пользователя

Страница: 180 / 212

Maintaining the Ink Cartridge

10.1

About the Ink Cartridge

The ink cartridge for printing is located in the Mailing System and contains ink that has

been tested and approved by the postal service.
The ink cartridge uses ink jet technology. It requires the print head nozzles to be cleaned

regularly to provide a good printing quality. The system performs cleaning automatically

or on your request. You can also clean the heads manually if the automatic cleaning

is not sufficient.
The ink cartridge also contains two print heads that have to be aligned.

If you observe poor print quality (streaked, too light, blurred,

etc.), see

Cleaning the Print Heads

on page 178.

Ink Cartridge Maintenance

This section explains how to:

• Check the ink level in the cartridge to make sure you will not be run out of ink.
• Align the print heads.
• Do an automatic cleaning of the print heads.
• Clean the print heads manually.
• Change the ink cartridge.

The term 'Print Headset' is also used to refer to the Ink Cartridge.

175

| Page 175 | | Jul-24-2023 01:56 |

Maintaining

your

Mailing

System

Содержание IS-350





















































































































































































































Результаты поиска

Содержание IS-350

Отзывы:

Похожие инструкции для IS-350

Бренды по названию

Популярные бренды

quadient IS-350, Руководство пользователя

Результаты поиска

Содержание IS-350

Отзывы:

Похожие инструкции для IS-350

Бренды по названию

Популярные бренды