quadient DS-77iQ, Руководство пользователя

Страница: 127 / 156

• Maximum number of sheets: use the [-] or [+] button to select the maximum amount
of sheets in the set of documents.
The maximum number of sheets in a set is 25. When the number
of sheets exceeds 5 or 8, depending on the fold, the document can
not be folded anymore. In this case, the maximum length of sheets
is 148 mm for a C5/6 envelope. Also make sure that the fold is set
to No fold. Ignoring this will certainly lead to stoppages.
When the maximum number of sheets exceeds the programmed
maximum number of sheets in a set, the system stops and error
INS-RE1-312 will be displayed. After removing the set and tapping
the [Start] button, the system starts and repeats the process until
an insert or divert mark is encountered. Error INS-RE1-003 (final
set part) will be displayed.
• Reverse reading: when reverse reading has been set to "On" the decision of inserting
a mailset is marked on the next set. For example with OMR the insert mark is printed
on the first page of the set. The system will detect the end of a set by detecting the
first page of the next set. For example in case of BCR using the Customer ID to
complete a set. If the ID changes, the set is inserted.
In case the feeder runs empty, the last set is still on the collator because the beginning
of the next set could not be detected. In this case the feeder empty message contains
an [Ignore] function. Tap [Ignore] and the set on the collator will be inserted.
Because of the feeding and collating principle reverse reading has the following
limitations:
- The last mark of the code should be printed maximally 85 mm (3.3 inch) from the
top.
- Enclosures and selective enclosures cannot be handled. When a versaFeeder
module is added to the system configuration, enclosures and selective enclosures
can be handled with reverse reading.
8
English
123
| Page 123 | Jul-11-2022 07:45 | Reading