INSTALLATION
Step 1
Mount the bracket as shown to the wall or other mounting surface
using suitable screws.
Step
Mount the bracket with the threaded bolt to the cabinet using the
4 supplied screws.
Step
Place the rubber friction washer over the bolt.
Step
When you’re ready to install the speaker insert the bolt in the wall
bracket from below.
Step
Place the dome cover over the bolt.
Step 6
Place the lock washer and hex nut on the bolt. Tighten gently, aim
the speaker as needed and tighten firmly.
Step 7
Ensure that seismic restraint cable is firmly attached to both the
loudspeaker and an anchor point on the mounting surface.
STEP 2
STEP 3
STEP 1
Содержание Q4
Страница 6: ...STEP 5 STEP 6 STEP 7 FINISHED STEP 4...