QUAD CONCOURSE Q - 2 - REV 1, Инструкция пользователя

Страница: 9 / 12

Then, slowly increase the speaker’s level by turning the Volume
control counter-clockwise until the sound level is adequate for
the application.
TROUBLESHOOTING
NOTE: The Concourse Q6A and Q8A are not user-serviceable,
and no attempt should be made to repair or modify the electronics
in the field. Refer all service and repair to the nearest authorized
QUAD Industrial service center or directly to the QUAD Industrial
distributors sales office in your region.
In the event that the speaker does not power up, first check the
power outlet and the power cable. If power is present at the outlet,
REMOVE THE POWER CABLE FROM THE SPEAKER and check
the internal fuse that is mounted inside of the IEC receptacle on
the rear panel of the speaker. Use a small screwdriver to gently
remove the fuse holder and test the continuity of the fuse. Replace
the fuse with only the exact model and value printed on the rear
panel based on the voltage at which the speaker is set. Connect
the AC supply and switch on the speaker.
COMPLIANCE
This product is in compliance with CE directives and bears the CE
mark. For detailed information on specific directives please contact
your local QUAD Industrial sales office or distributor.