ReducingBatteryConsumption
■
Using Battery Saver
Set up to switch to Battery Saver Mode automatically when the battery is running low.
1
2
3
On the Home screen, [基
本機能 (Basic functions)]
→ [Settings]
[Battery & power saving]
[
] on "Battery saver"
* Confirm the status such
battery etc. on "BATTERY
INFORMATION".
■
Setting Battery saver on timing
1
2
3
4
5
On the Home screen, [基
本機能 (Basic functions)]
→ [Settings]
[Battery & power saving]
[Battery saver]
[Turn Battery saver on]
Tap timing
E-mailSettings
HowtotransferdatafromtheauSettingsmenu
Return or store data from your previously used au phone to this product using a microSD card or the au Smart Pass server.
• You need to setup an au ID to restore or save data using au Smart Pass servers.
• If you use a microSD memory card to restore data, save the data from your previous au phone to a microSD memory card.
■
How to restore data from the au Settings menu
ReceivingCalls
You can receive a call in the following steps.
* "Receive an incoming call over the operation screen" is set to "ON" in Sync Call
settings by default. This section describes with the default setting mainly.
1
2
3
[Accept] during an
incoming call
The call starts.
[End] to end the
call
TransferringContacts
You can transfer data from your previous phone to the product using a
microSD memory card.
1
Save the
contacts
(address book)
from your
previous phone
to a microSD
memory card,
and insert the
card into the
product
Refer to the
instruction manual
of your previous
phone, etc. on
how to save the
contacts.
2
3
On the Home
screen, [基本機能
(Basic functions)]
→ [Contacts] →
“Contacts”
[ ] → [Manage
contacts] →
[Import]
* When a contact is not
registered, tap [ ] →
[Import] → the import
source to proceed
to step 5. If a saving
location screen
appears, select the
desired account or
location.
4
5
6
[SD card] →
[OK]
* If a saving location
screen appears,
select the desired
account or location.
Place
checkmarks
on the item to
be imported →
[IMPORT]
[IMPORT]
* When the import is
complete, "Contacts
imported" appears.
MakingCalls
■
Entering a phone number to make a call
1
2
On the Home
screen, [ ]
Enter a phone
number → [ ]
■
Calling from Contacts
1
2
3
On the phone
screen, tap
"Contacts" tab
Tap the other party
to be called
* Tap [ ] to skip
the contact details
screen and directly
make a call.
Tap a phone
number
■
Calling from Call logs
1
On the phone
screen, tap "Call
logs" tab
2
Tap the other
party to be
called
3
Tap a phone
number
1
2
3
4
5
6
6
On the Home screen, [基本
機能 (Basic functions)] →
[Settings]
[au Settings Menu]
[Data Transfer]
* If the terms of use appears,
check the content and follow
the onscreen instructions.
Select a method for
returning data
* You need to setup an au ID to
restore data using [auスマート
パスのサーバから戻す (Restore
data from au Smart Pass
servers)] (data backed up on
au Smart Pass servers).
If you selected [SDカード
から復元する (Restore data
from SD card)], select your
previous au phone model
* This screen is not displayed if you
selected [auスマートパスのサーバから戻
す (Restore data from au Smart Pass
servers)] on the restore data method
screen.
Place checkmarks on the
data you want to restore
→ [戻す (Restore)]→[完了
(Done)]
* This screen is displayed if you selected
[スマートフォンのデータを戻す (Restore
smartphone data)].
* When a confirmation screen appears,
follow the onscreen instructions.
Place checkmarks on the
data you want to restore
→ [戻す (Restore)]→[完了
(Done)]
* When a confirmation screen
appears, follow the onscreen
instructions.
■
Saving data from au Settings Menu
1
2
3
4
5
5
On the Home screen, [基本
機能 (Basic functions)] →
[Settings]
[au Settings Menu]
[Data Transfer]
* If the terms of use appears,
check the content and follow
the onscreen instructions.
Select a saving location
* You need to setup an au ID to save
data from [auスマートパスのサーバに
預ける (Save data to au Smart Pass
server)] (saving data to au Smart
Pass servers).
Place checkmarks on the
data to be saved, [預ける
(Save)] → [完了 (Done)]
Place checkmarks on the data to be saved, [預
ける (Save)] → confirm the details, follow the
instructions on the screen → [完了 (Done)]
* When a confirmation screen appears, follow
the onscreen instructions.
■
Receiving a call during
sleep mode
You can receive a call in the same
manner even when Sync Call is
OFF
1
Flick (Swipe) up/down/
left/right "Answer" during
an incoming call
2
The call starts.
3
[End] to end the call
■
Rejecting an
incoming call
When you reject a call, the caller
is informed that there is no
response.
1
[Decline] during an
incoming call
When [SDカードから復元す
る (Restore data from SD
card)] is selected
When [SDカードに保存す
る (Saving to SD card)] is
selected
When [auスマートパスの
サーバから戻す (Restore
data from au Smart Pass
servers)] is selected
When [auスマートパスのサーバに
預ける (Save data to au Smart
Pass server)] is selected
If you want to use the
"Data backup" application
to automatically save your
photos and contacts to the
au Smart Pass server, you
can set it up by following the
procedure below.
On the Home screen → [基
本機能 (Basic functions)] →
[Settings] → [au Settings
Menu] → [Data Transfer] →
place checkmarks on the
data to be saved
E-mail (@ezweb.ne.jp) is a service that enables you to exchange e-mails
with other cell phones, which support e-mail, and with PCs. Your e-mail
address is decided automatically after the initial settings.
The e-mail address in the initial settings can be changed.
■
Initial Settings
1
2
On the Home screen, [ ]
Confirm E-mail address →
[閉じる (Close)]
* If the confirmation screen for
e-mail application appears,
check the content and follow
the onscreen instructions.
■
Confirming your e-mail address
1
2
On the E-mail screen,
[
] → [E-mail information]
Your e-mail address appears in the
e-mail address field.
■
Changing your e-mail address
1
2
3
4
5
On the E-mail screen, [
]
→ [Change Address/Setting
Filter]
[ Eメールアドレスの変更へ ( T o
Change E-mail address)]
Enter the security code
→ [送信 (Send)]
Confirm the contents →
[承諾する (I accept)]
Enter e-mail address →
[送信 (Send)]
6
7
[OK]
[閉じる (Close)]
■
PC mail
E-mail ( ) can be used to send/receive e-mail from this product by setting
a mail account that you normally use on your PC.
1
●Using PC mail for the first time
Setup a PC mail account. Activate this
application and select an e-mail provider
→ enter a PC mail address and password
→ [NEXT] → follow the onscreen
instructions.
* If you need to manually enter the settings,
contact your service provider or system
administrator for the correct PC mail account
settings.
On the Home screen,
[Other Apps] → [Email]
■
Gmail
Gmail is a mail service provided by Google. You can send/receive Gmail
from this product.
You can also use Gmail from the PC or the browser on the product and
share mail information.
1
On the Home screen, [Google]
→ [Gmail]
