Qu-Bit Electronix Data Bender, Руководство пользователя

Страница: 9 / 25

Functions - Different Between Modes
4. Mode
The next two functions, Bend and Break, vary functionality between modes, which is determined
by the Mode button.
Pressing the Mode button selects between Macro Mode (Blue LED) and Micro Mode (Green LED).
These modes are described below, and change the way Bend and Break work. The rest of Data
Bender’s functions are persistent between modes.
Macro Mode
5. Bend
Bend provides manipulations that are inspired by the tape medium and its associated playback
machines. With this control you can experience the following effects:
• Vari-speed pitch changes
• Reversed audio playback
• Vinyl clicks and pops
• Tape stop
Enabling/Disabling bend using the Gate or Button will toggle this control on or off. When enabled
(LED Blue), every clock division a certain manipulation of the playback speed and direction can
occur. When the knob is all the way down, the effect is disabled.
At the lowest settings, it will only have a slight chance to reverse the audio at the normal play-
back speed. At the maximum settings, it can play back the audio forward or backward at various
intervals, and will begin to introduce a slew to the changes in playback speeds.
Bend CV Input Range: -5V to +5V from the knob position
Bend Gate Input Threshold: 0.4V
Macro mode is a set of 2 controls (Bend and Break) that have automated parameters based on
the clock settings. Macro Mode is indicated by a Blue Mode LED.
Set the knobs where you like them and let the Data Bender bend your data for you.
mode
Macro Mode
mode
Micro Mode
7