154.012UK User Manual
Setting up
Install the WSL-Q7 by the mounting bracket, which can also be configured as a floor stand.
Experiment with positioning and distance to get the best coverage for the area to be lighted.
For DMX or master/slave control, link DMX out to DMX in using good quality DMX leads.
If the WSL-Q7 is to be mains operated, connect to mains using the appropriate IEC lead.
Rear panel
Operation
The WSL-Q7 can be operated in static, auto, sound activated or DMX modes.
Depending upon which mode of operation is required, it will be necessary to select options
and settings via the control panel and display (2). To set the operating mode, press FUNC,
then UP
or DOWN
through options, then ENTER to select an option.
Note: Panel Lock
One of the available settings is to activate a security Panel Lock, which can avoid tampering or
mistaken adjustment of control settings. When this is active, the control buttons will not work.
To unlock the control panel, press the following sequence…
“UP
… DOWN
… UP
… DOWN
… ENTER”
(same sequence to lock the panel again)
1.
Antenna connection
2.
Control panel & LED display
3.
DMX out XLR
4.
WDMX channel button and LED
5.
DMX in XLR
6.
Mains inlet IEC and fuse holder
7.
Battery check button & LEDs
8.
Wireless DMX on/off switch
9.
Internal microphone
10. Power switch
