150.451UK User Manual
Installation
Installation should be carried out
by qualified personnel only and
must comply to HSG95
guidelines. Avoid projecting the
effect directly towards the
audience’s eye level. This unit is
suitable for free standing,
overhead installation or mounted
on a speaker stand.
For overhead mounting, use the
supplied mounting brackets as
pictured below. Simply guide the
thumbscrews into the sockets on
the back of the unit and turn 90°
until you feel a click which
indicates the screw is locked into
place. The brackets are suitable
to mount on truss bar of up to
48mmØ . Ensure the fly point is
connected to the truss by safety
wire for additional support.
The Tetramer has a built-in
35mmØ top hat allowing
the unit to be mounted on
a speaker stand, ideal for
mobile DJs. Further effect
lighting units such as a
PAR Can or a mini laser
can be mounted on top of
the unit, maximising the
use of a single stand.
Please note, equipment
that creates momentum
while working; such as
moving heads are not suitable to be added. Extra weight should not exceed 5kg and max
weight should not exceed the max weight load rating of the stand. Cable management should
be performed carefully to avoid cables being caught up by the movement of the 4 heads.
