Qtx SW-2, Руководство пользователя

Страница: 3 / 6

160.565UK User Manual
Rear Panel
Setting up
The SW-2 requires snow fluid, which forms small foam drops to create the snow effect.
It is recommended to use qtx snow fluid for best results (160.578, 160.579)
A chart for recommended fluids is included further along in this document.
 Unscrew the top cap of the fluid tank (removable) and fill with the selected snow fluid
 The SW-2 can accommodate a complete 5 litre snow fluid refill if preferred
 Replace the cap and close securely, ensuring the pipe is fed down to the bottom of the bottle so that a
consistent flow of fluid is supplied to the machine
 Connect the remote control to the 5-pin DIN connector on the rear panel (6)
 Connect the IEC mains lead supplied to the rear mains inlet (5)
Remote control operation
1. DIP switches for DMX address setting
2. DMX input (3-pin XLRM)
3. DMX output (3-pin XLRF)
4. Power on/off rocker switch
5. Mains inlet (IEC male) and fuse holder
6. Remote control connection (5-pin DIN)
7. Fluid level indicator
8. Snow output control – adjusts the amount of fluid delivered by the pump
9. Snow effect indicator – illuminates when effect is activated
10. Power indicator – illuminates when mains power is switched on
11. Snow effect on/off rocker switch – switches the fan on or off