178.858UK User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the QX8PAV stereo portable PA, which has been designed to provide a complete wire-free sound
solution for a wide range of applications. Please read this manual fully to understand the various features on the QX8PAV
and get the best results from this product.
Package Contents
Please check the contents to ensure the QX8PAV has been received in good condition with the following.
Main portable PA speaker unit
Satellite speaker with 6.3mm jack connection lead
2 x VHF handheld microphones
I.R. remote control handset
Power adaptor with appropriate Fig.8 mains lead(s)
If any accessory is missing or the product has any problems, please contact your retailer at once.
Warning
This product contains no user-serviceable parts so make no attempt to try to fix or modify this item yourself as this will
invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible replacement
or returned demand. To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To
prevent electric shock do not remove the cover. No user serviceable parts inside. Refer servicing to qualified service
personnel.
Safety: Labelling Conventions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is present
within this unit
This symbol indicates that there are important operating and maintenance instructions in the
literature accompanying this unit.
Prior to connecting mains, check the supply voltage is correct and the mains lead is OK.
Avoid ingress of water or particles into the enclosure.
If the mains or D.C. fuse blows, refer the unit to qualified service personnel
Placement
Keep the unit out of direct sunlight and away from heat sources.
Keep the unit away from moisture or dusty environments.
Mount the unit on a stable surface, 35mm pole mount or suspend using the integral flying points.
Ensure that any supporting structures have adequate load capacity for the weight of the unit.
Cleaning
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. To avoid damage, do not use solvents.
