Quorus User Manual
Control panel
Rear panel
Setting up
The Quorus column array is supplied with 2 carry bags. One is for the
sub cabinet and the other is for the column speaker and 3 extension
sections.
Remove all parts from packaging or carry bags and position the sub
cabinet where the system is required for use. Determine how tall the
system needs to be, bearing in mind that the ideal height for the
column speaker is just above head-height of the audience. It is
possible to use 3, 2, or 1 extension sections, or even none if the array
is positioned on a high stage.
Assemble the column by sliding extension sections from back to front
onto the slot on top of the sub cabinet, slide further extension sections
on top of each other in the same way, taking care not to use too much
force.
Finally, slide on the column speaker section (this is the section with no
connection slots on top).
1
DSP voicing indicators
2
B/T pairing button
3
L+R RCA line A input
4
Mic/Line level switch
5
Balanced line output
6
B/T, power, signal and clip LEDs
7
DSP voicing selector
8
Line A XLR/jack combo input
9
Line A input level
10 Mic/Line B XLR/jack combo input
11 Mic/Line B input level
12 IEC mains inlet & fuse holder
13 Power on/off switch
