Rear Panel:
Setting Up:
1.
Unpack the QTFX-LBF1 unit.
2.
Unscrew the top cap of the fluid tank and remove to fill with fog fluid.
3.
Replace the bottle and screw the cap securely, making sure that the pipe is fed down
to the bottom of the bottle to ensure a consistent flow of fluid.
4.
Carefully fill the bubble reservoir with bubble fluid, taking care not to overfill it but
ensuring there is sufficient fluid to cover the wands.
5.
Connect the wired remote to the socket marked
“
REMOTE
”
on the rear panel.
6.
Connect the IEC mains plug and power the unit on.
7.
The unit will begin the warming up process which normally takes around 3-5 minutes.
8.
After use, remember to empty the haze fluid tank and bubble reservoir by removing
the water outlet plug on the back of the unit.
Operation: Wired remote
FUNC:
Press to scroll through the menu options (see below
table).
TIMER:
Press to set up fog timer
UP:
Press to increase the current menu value
START/STOP:
Press to start and stop continuous fog option
DOWN:
Press to decrease current menu value
