CONTROLS:
OPERATION:
Connection
Your new QTX QR-series portable PA unit may arrive with you with the internal
battery fully charged. Before connecting to the mains, switch the unit on and see if
the power LED lights. If not, you will need to charge the battery before using away
from a mains supply (see “
Charging the battery
” below)
Connect the QR-series portable PA unit to the mains using the appropriate mains IEC
lead supplied. You may otherwise opt to connect the spring terminals at the rear to
an external 12Vdc supply, such as a car battery, or use the internal battery if
charged.
1)
USB input
2)
SD card slot
3)
2-band EQ controls (BASS + TREBLE)
4)
Music volume control
5)
VCV voice controlled volume switch
6)
6.3mm jack microphone inputs
7)
Radio Frequency indicators (VHF carriers)
8)
Wireless microphone volume controls
9)
External 12Vdc power input
10)
Charging indicator
11)
Mains power indicator
12)
Media player LCD display
13)
Media player mode/transport controls
14)
Microphone Echo level control
15)
Microphone inputs volume control
16)
AUX line input
17)
Line output
18)
VHF receiver power indicator
19)
VHF receiver power switch
20)
VHF microphones antennae
21)
D.C. power fuse
22)
Power switch
23)
Mains fuse holder
24)
IEC mains inlet