DMX mode:
The Pixel-Bar can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on
the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address and channel selection by using the
“
UP
”
and
“
DOWN
”
buttons and
“
ENTER
”
. The
“
d
”
on
the LED display will begin to flash once it
’
s received the DMX signal from the controller. This unit has 3, 5,
8, 24, 48 or 53 DMX channels as indicated in the table below:
3 Channel mode:
Channel
Value
Function and description
1
0 - 255
Red dimmer (0-100%)
2
0 - 255
Green dimmer (0-100%)
3
0 - 255
Blue dimmer (0-100%)
5 Channel mode:
Channel
Value
Function and description
1
0 - 255
Master dimmer (0-100%)
2
0 - 9
No function
10 - 255
Strobe (slow to fast)
3
0 - 255
Red dimmer (0-100%)
4
0 - 255
Green dimmer (0-100%)
5
0 - 255
Blue dimmer (0-100%)
8 Channel mode:
Channel
Value
Function and description
1
0 - 255
Master dimmer (0-100%)
2
0 - 255
Red dimmer (0-100%)
3
0 - 255
Green dimmer (0-100%)
4
0 - 255
Blue dimmer (0-100%)
5 (only valid when
0 - 9
No function
CH6 value<10)
10 - 13
Static colour (CH7 choice)
14 - 229
Built in effects 1-54
230 -233
Auto mode (run built in effects 1-54)
234 - 255
Sound activated modes 1-3
6
0 - 9
No function
10 - 105
LED segments 1-16 light up (CH2. CH3, CH4 control colour
and if CH7>100 the other LED segments are off)
106 - 255
Pattern effects 1-24 (CH2, CH3, CH4 control pattern colours)
7
0 - 9
No function
10 - 255
Static colours 1-25
8
0 - 9
No function
10 - 255
Strobe (slow to fast)
24 Channel mode:
Channel
Value
Function and description
1
0 - 255
Master dimmer (0-100%)
2
0 - 255
Red dimmer (0-100%)
3
0 - 255
Green dimmer (0-100%)
4
0 - 255
Blue dimmer (0-100%)
