EE00
EE00-EE99
Colour fade setting (speed slow to fast)
CC00
CC00-CC99
Colour pulse setting (speed slow to fast)
F000
F000-F255
Strobe setting (speed slow to fast)
SoUD
SoU0-SoU9
Sound to light colour jump setting (sensitivity high to low)
SUnD
SUn0-SUn9
Sound to light colour pulse setting (sensitivity high to low)
r000
r000-r255
Red dimming (0-100%)
G000
G000-G255
Green dimming (0-100%)
b000
b000-b255
Blue dimming (0-100%)
u000
u000-u255
White dimming (0-100%)
o000
o000-o255
IR remote control dimming (dark to bright)
Remote control:
The PAR54 is supplied with an I.R. remote control for quick access to most of the basic functions of the
unit. This has a maximum range of approximately 4-5m and must be aimed towards the front of the unit.
Controls and functions are listed on the diagram below:
DMX mode:
The PAR54 can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on
the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the
“
UP
”
and
“
DOWN
”
buttons and
“
ENTER
”
to confirm.
This unit has 8 DMX channels as indicated in the table below:
Channel
Value
Function
CH1
0-255
Master dimming (0-100%)
CH2
10-255
Strobe (speed slow to fast)
CH3
0-50
CH1-CH6 control
051-100
Manual colour selection
101-150
Colour jump
151-200
Colour fade
201-250
Colour pulse
CH4
0-255
Function speed control (slow to fast)
1.
Power = Remote on/off
2.
+ = Increase option setting
3.
DMX = DMX512 open/off
4.
Auto = Automatic mode
5.
Red = Red open/off
6.
Motor = Manual colour select
7.
Jump = Colour jump mode
8.
Sound = Sound activated mode
9.
-- = Decrease option setting
10.
Green = Green open/off
11.
Blue = Blue open/off
12.
White = White open/off
13.
Flash = Strobe open/off
14.
Gradual = Colour fade mode
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
