150.448UK User Manual
GENERAL MAINTENANCE
To maintain optimum performance and minimize wear, fixtures should be cleaned
frequently. Usage and environment are contributing factors in determining frequency.
As a general rule, fixtures should be cleaned at least twice a month. Dust build-up
reduces light output performance and can cause overheating. This can lead to
reduced life and increased mechanical wear. Be sure to power off the fixture before
conducting maintenance.
Unplug fixture from the mains and use a vacuum or air compressor and a soft brush
to remove dust collected on external vents and internal components. Clean all glass
when fixture is cold with a mild solution to the cloth or tissue, and drag dirt and
grime to the outside of the lens. Gently polish optical surface until they free of haze
and lint.
The cleaning of external optical lenses must be carried out periodically to optimize
light output. Cleaning frequently depends on the environment in which the fixture
operates: damp, smoky or particularly dirty surroundings can require cleaning fluid.
Always dry the parts carefully. Clean the external optics at least every 20 days.
150.448UK User Manual
REAR LAYOUT:
1.
IEC Power IN and fuse holder
2.
DMX IN
3.
DMX OUT
CONTROL DISPLAY FOR:
1.
MODE\ESC: Menu or withdraw the last menu
2.
UP: Increase one step each time
3.
DOWN: Decrease one set each time
4.
ENTER: Confirms the functions you select
