MIXCAB-15, XCAB-15 User Manual
Each input channel has BASS and TREBLE EQ controls (21, 22), which are neutral when set to
the vertical 12 o
’
clock position. To reduce the BASS or TREBLE frequency content for an input
channel, turn the respective control to the left. To boost the BASS or TREBLE frequency
content for an input channel, turn the respective control to the right.
In addition to EQ controls, each channel also has an individual ECHO control (19) which varies
the amount of the internal echo effect applied to that input. To enable the echo effect, slide
the ECHO switch (12) to the ON position and turn up the ECHO VOL control (13) part way.
Increase the ECHO control (19) for the input channel gradually whilst speaking into the
microphone or playing the line level signal into it. The echo effect should now be audible
through the speaker. Set the main ECHO VOL control to the maximum required amount of
echo effect and adjust for each channel using its own ECHO control.
Internal media player
The MIXCAB-15 unit has a media player for digital audio playback from USB or SD/MMC media
FM tuner or via Bluetooth. The player can also be used to record audio to a USB or SD card.
Turn the media player volume control (17) up to hear the output through the speaker.
Press
MODE
to select the required function:
USB, SD, REC, FM radio (89-107) or Bluetooth
–
Use this mode for USB or SD/MMC cards
–
Use this mode to record to media
FM Radio
–
(the last frequency will appear)
–
Use this mode for
Bluetooth™
selection
Playback from USB Device or SD/MMC Card
Inserting a USB memory device into the USB connector or SD/MMC card into the SD/MMC card
slot will automatically load up and begin playback of mp3/wma tracks stored on the media.
If playback does not start, press the Play/Pause (
) button or remove the memory device
and check that the stored files are the correct mp3 or wma format before re-connecting.
•
Play/Pause (
) will alternately play or pause the selected track
•
Previous track (
) will step backwards through tracks
(holding this button will reverse seek through the current track)
•
Next track (
) will step backwards through tracks
(holding this button will reverse seek through the current track)
•
REPEAT will select between repeating
track or
tracks
•
STOP (
) will stop playback and return to the start.
To move to the previous folder on the storage device, press and hold the STOP (
) button.
To move to the next folder on the storage device, press and hold the REPEAT button.