Specifications:
Power supply
100-240Vac, 50/60Hz (IEC)
Power consumption
120W
LED quantity
9x 10W RGBWA-UV
DMX channels
6/10CH
Beam angle
25°
IP rating
IP65
Modes
Manual, Auto, sound-activated, master/slave, DMX512
Connections
Power in, power out, DMX in, DMX out
Dimensions
240 x 240 x 150mm
Weight
4.8kg
Troubleshooting:
No power (mains)
Check mains voltage is correct, and outlet is switched on
Check IEC leads are properly connected
No light output
Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Unresponsive to DMX
Check that unit is in DMX mode and ensure DMX address remains lit to
confirm receiving DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/
cutting out
Ensure adequate ventilation and unit is not too close to a heat source
IP65
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at
the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2022 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
Taylor Road, Trafford Park, Manchester. M41 7JQ.
North Point Bus. Park, New Mallow Road, Cork, Ireland.