160.474UK User Manual
Recommended fluid
For the FH-650 haze machine, we strongly recommend the following fluid which has
been specifically formulated to perform best with any heater based haze machines.
QTX ref code
Description
Size
160.591UK
High quality professional Haze fluid
5 Litre
Use power supply with Earth connection and adequate current capacity for the unit
Use the plug to connect to the main power supply as follows:
Wire
Connection
International signal
Brown
Live
L
Blue
Neutral
N
Yellow /Cyan
Earth
Setup and operation
1.
Unpack the FH-650 unit.
2.
Unscrew the top cap of the tank and remove to fill with haze fluid.
3.
Replace the bottle and screw the cap securely, making sure that the pipe is fed
down to the bottom of the bottle to ensure a consistent flow of fluid.
4.
Set the output aperture to the angle required for ideal dispersion.
5.
Connect the remote control via the 5-pin DIN socket on the rear panel.
6.
Connect the IEC mains plug and switch the power on. The red LED on the
remote control will light.
7.
Heat up time is usually between 5-8 minutes. Please ensure that no button is
pressed during the heat up time. When the machine is ready the green light
on the remote control will illuminate.
8.
Turn the output to max and press the Manual button on the remote control for
5 seconds so that the fluid has can flow through to the heater block.
9.
Adjust the fan speed and output on the remote control to the required output
consistency. It is recommended to produce haze/fog with small pauses in
between so that the temperature is maintained and the thermostat doesn’t
switch off.
10.
Use the remote timer control to change output settings as required.
11.
When not in use, disconnect from the mains and allow the unit to cool before
moving or storing.
12.
If not used for long periods, empty the fluid and store in a dry place.
Содержание FH-650
Страница 5: ...160 474UK User Manual...
