Qtx FH-1500, Руководство пользователя

Страница: 2 / 6

160.465UK User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the FH-1500 fog/haze machine for stage and events special effects. This product is
designed to produce variable fog and haze for atmospheric special effects. Please read these instructions fully
in order to gain the best results from this item and avoid damage to the unit through misuse.
Unpacking
Your FH-1500 should reach you in good condition and should be supplied with IEC mains lead(s), wired
remote timer control, wireless plug-in receiver and key fob remote.
If there are any signs of damage or items missing from the packaging, contact your dealer immediately.
Warning
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on areas other than inside the fluid tank, disconnect the mains, allow the FH-1500 to dry
out and have it checked by qualified personnel before further use.
Avoid any impact, dropping or extreme pressure to the housing.
No user serviceable parts inside - do not open the case.
Allow the FH-1500 to acclimatize to room temperature before operating.
Refer all servicing to qualified service personnel.
Placement
The FH-1500 has a built-in fluid container and should be operated in an upright position.
Ensure that the FH-1500 is positioned on a stable, non-slip surface.
Allow adequate air-flow around the unit as this is critical to the function and safety of the FH-1500.
Allow adequate space for access to the controls and to avoid straining cables and connections.
When moving or carrying the FH-1500, use the top-mounted handle.
Safety

Check for correct mains voltage and condition of IEC lead before connecting to power outlet
 Check the condition of the remote lead and ensure that it is not trapped
 This unit must be earthed
 This unit uses a heating element – be aware that parts of the housing may be hot whilst in use!
Cleaning
 Use a soft dry or slightly damp to clean the casing
 Do not use strong solvents for cleaning the unit
 Clean the haze mechanism periodically by operating with distilled water instead of haze fluid
 It is also recommended to use fog machine cleaning fluid (160.670UK) periodically