Manual control menu:
Press the “
MENU
” butto
n to enter the settings menu.
P
ress “
UP
” and “
DOWN
”
buttons to navigate through various setting functions.
P
ress “
ENTER
”
button to confirm the desired setting.
Menu
Function
Description
Addr
A001-A512
DMX address settings
Auto
Aut0-Aut9
Auto mode - slow to fast
SoUn
SoU0-SoU9
Sound to light mode - sensitivity low to high
vEr
vE1.2
Software version 1.2
DMX modes:
The Crystalizer can be controlled by DMX signal, simply connect the DMX signal source to the DMX input
on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the
“
UP
”
and
“
DOWN
”
buttons and
“
ENTER
”
. The A on the LED display will begin
to flash once it
’
s received the DMX signal from the controller. This unit has 16 DMX channels as indicated
in the table below:
16-CH (start address A001 for 1st unit, A017 for 2nd unit etc):
Channel Function
Value
Details
CH1
Laser on/off
0-9
Laser off
10-99
Laser on
CH2
Colour control
0-69
Fixed colour choice (W, R, B, P, C, Y, G)
70-79
Whole colour change (chase speed controlled by CH3)
80-89
Default colour (chase speed controlled by CH3)
90-99
7 Colours (chase speed controlled by CH3)
100-224
Segment colour choice (chase speed controlled by CH3)
225-229
Dynamic colour chase 1 (chase speed controlled by CH3)
230-234
Dynamic colour chase 2 (chase speed controlled by CH3)
235-239
Dynamic colour chase 3 (chase speed controlled by CH3)
240-244
Dynamic colour chase 4 (chase speed controlled by CH3)
245-249
Dynamic colour chase 5 (chase speed controlled by CH3)
250-255
Dynamic colour chase 6 (chase speed controlled by CH3)
