8/19
USER MANUAL
4.White holding
Record
, press the
Flash
button corresponding to the DMX output that you wish
to assign the Fader to.
5.Repeat steps 2-3 as often as necessary
6.Press and hold
Record & Rec Exit
to exit the mode.
Al physical faders can be re-assigned to output on a different DMX channel, Faders are given
a channel number and are labelled on the surface of the controller as such.
You can check to see what the assignment is by pressing the Fader button of the
corresponding channel while in this mode.
Here is no limit to the amount of channels that can be assigned to a single faders. One can
assign up to all 48 channel while in this mode.
CHNO corresponds to the Physical Fader, while SLDNO corresponds to the DMX output
channel.
NOTES:
F or exam ple: you wish to assign F ader # 1 to
output to DM X channel # 5
1 . Hold the R ecor d button & pr ess F ader # 6 (3
tim es)
2 . Pr ess the F lash button # 1 .
3 . While holding the R ecor d button, pr ess the
F lash button # 5 .
DM X 5 1 2 CON T ROLLER SERI ES
