100.615UK User Manual
FM mode:
•
Select FM mode by short pressing the
Power/mode button
repeatedly until you hear the relevant voice
prompt.
•
To perform a channel scan, short press the
Play/pause button
. The Effect will now scan through the FM
frequency, automatically saving any stations with a strong enough signal.
•
Once the scan has finished, you can scroll back and forward through the saved channels using the
Previous track/station
or
Next track/station
buttons accordingly.
Note:
If you are experiencing interference or poor signal quality on certain stations, it may be necessary
to move the unit nearer to a window or doorway.
AUX in mode:
•
The Effect can also be connected to any audio device with either a single headphone 3.5mm jack or twin
RCA stereo output using the appropriate connection lead (not provided).
•
Simply connect the device correctly to the AUX in port on the back of the unit and enter the AUX mode by
short pressing the
Power/mode button
repeatedly until you hear the relevant voice prompt.
•
Music from the connected device can now be played through the Effect
’
s speaker.
Note:
Ensure you have the volume on the connected device turned up to an audible level. The track
control buttons on the Effect won
’
t be able to control the music on the connected device when using the
AUX connection.
USB voice record mode:
•
With a compatible USB device connected to the unit, short press the
Power/mode button
repeatedly
until you hear the relevant voice prompt.
•
Connect the microphone supplied to the microphone jack on the back of the unit.
•
Next, short press the
Next track/station
button to begin recording through the connected microphone.
•
Short press the
Previous track/station
button to end the current recording session.
•
Short press the
Play/pause button
to listen to the last recorded session.
•
To listen to all your recording sessions in order, press the
Power/mode button
and enter normal USB
playback mode. You can then scroll through the sessions using the
Play/pause, Previous
track/station
or
Next track/station
buttons on the front of the unit the same as you would a normal
MP3 album.
Note:
To avoid interference, the unit
’
s speaker will be automatically disabled whilst recording through the
connected microphone.
Using the microphone:
•
Connect the microphone supplied to the back of the unit as described above and switch it on.
•
You can now sing along to your favourite music tracks whilst playing them through Bluetooth, USB, AUX in
and FM modes.
•
To adjust the microphone
’
s echo/reverb effect up and down, long press the
Previous track/station
or
Next track/station
buttons accordingly.
Note:
The microphone
’
s volume can only be controlled by the unit
’
s master volume and has no
independent volume control.
LED light show:
•
The Effect has an inbuilt disco style LED light show housed within its front grille design. This will be
automatically enabled when the unit is switched on.
•
To disable the light show at any time, long press the Play/pause button.