User Manual – MW-36
150.450UK
8
13. Display controls:
DISPLAY
FUNCTION
Addr
A001-A501(503)
DMX address
Yes
PAN
No
Reverse Pan movement
Yes
Tilt
No
Reverse Tilt movement
At01
Auto program 1
At02
Auto program 2
Sn01
Sound to Light program 1
Sn02
Sound to Light program 2
dnCo
Dmx control mode
PLAY
Slae
Slave function
CH01
Channel Select
MAN
d001
DMX address
dSIP
For when fixture is mounted upside
down
dISP
dISP
For when fixture is floor standing
Resets the fixture
rESt
oFAn
Yes
Turns the fan off after 60 seconds
when the LEDS are off
No
Leaves the fan on all the time
User Manual – MW-36
150.450UK
5
6. Connect with power supply:
Use the plug to connect to the main power supply as following.
Line
Connection
International signal
Brown
Live
L
Blue
Neutral
N
Yellow /Green
Earth
E
7. Quick Trouble Shooting :
7.1 if the unit is not functional – Check if main power is on and fuse.
7.2 if the unit is not reacting to music – check the unit is in “M-SO” mode on
the display.
8. Replacing Fuse :
Disconnect from the main power supply first, then remove the fuse holder
above the IEC Socket to reveal the fuse. Replace the correct fuse rating as
stated on lighting or user guide. Then, lock the fuse holder cover back into
place.
9. General Maintenance :
To maintain optimum performance and minimize wear, fixtures should be
cleaned frequently. Usage and environment are contributing factors in
determining frequency. As a general rule, fixtures should be cleaned at least
twice a month. Dust build-up reduces light output performance and can cause
overheating. This can lead to reduced lamp life and increased mechanical
wear. Be sure to power off fixture before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft brush
to remove dust collected on external vents and internal components. Clean all
