Page 4
3.
Decide if you are going to use your dimmer pack as 1, 2, or 4 channels. This function allows
you to:
a.
Control the output to all four outlets with one DMX channel.
b.
Group outlet channels one and two and group outlets channels three and four. The first
group will be controlled by one DMX channel and the second group will be controlled by
another DMX channel. This gives the pack a DMX value of two.
c.
The default setting is a four channel DMX switcher, each channel is controlled by one
DMX channel.
4.
To change the channel function mode be sure you are in DMX mode. Use the MENU button to
select “CH” followed by two digits. Then use the UP and DOWN buttons to change the setting
from 01, 02, or 04. Your dimmer pack is initially set as a four channel DMX switcher.
5.
The dimmer pack is initially set to be activated by DMX address one. To change this setting
be sure you are in DMX mode. Use the MENU button to select the address settings, this will
be indicated by an “A” in the first character of the LCD followed by three numbers. Use the UP
and DOWN buttons to select your desired DMX address.
6.
Once you have set the pack’s DMX address be sure your controller’s address matches that of
the pack
7.
Your pack will now operate as DMX dimmer, you may control the light output intensity
through your DMX controller. 0 will give no output and 100 will give you full output.
SPECIFICATION:
Power supply:
230Vac, 50Hz
DMX Inputs:
1
Channel Outputs:
8
Size:
193 x 72 x 260mm
Weight:
2.5kg
Please disposal of the unserviceable device according to the current statutory requirements.
Copyright protected by QTX Light Manchester
WWW.QTXLIGHT.COM
