USER MANUAL – DM-X3 RGB PAR CAN CONTROLLER
154.090
Page 4
Blue Pulse
Green Pulse
Yellow Pulse
Purple Pulse
Cyan Pulse
Colour Switch
Hold current Colour
Use FADER 2 to adjust the speed of change or pulse speed
Use FADER 3 to adjust the flash speed of the light
AUTO MODE
Press “AUTO” button and the green LED light will illuminate to indicate this mode is active.
The light effects will change colour at a set speed which is controlled by “FADER 2” from slow to
fast.
SOUND ACTIVATED MODE
Press “SOUND ACTIVE” button and the red LED light above the button will illuminate to indicate
this mode is active. Use “FADER 3” to adjust the microphone sensitivity. The fixture will then
change colour when the beat of sound is detected
HOLD
Press the “HOLD” button and the RED LED above the button will illuminate to indicate this mode
is active. When in hold mode it will freeze all operations of any other buttons and sliders. The
light effect displays a static colour. You must release the “HOLD” button before any other
operation can happen.
BLACKOUT
Press the “BLACKOUT” button and the amber LED will flash to indicate that blackout mode is in
operation. It will turn off all fixtures instantly and turn them back on again when deactivated.
SPECIFICATION:
Power supply:
9-12V 300mA
Power consumption:
3.6 W
Size:
22 x 14 x 3.6cm
Weight:
0.81kg
Please disposal of the unserviceable device according to the current statutory requirements.
Copyright protected by QTX Light Manchester
WWW.QTXLIGHT.COM
