2
OPERATING INSTRUCTIONS
3
QUALITY GUARANTEE & WARRANTY
Q-TORQ PRODUCTS carry one years manufacturers warranty.
Q-TORQ PRODUCTS are designed & manufactured to the highest standards & specifications
Assuring the quality and performance required by all sectors of industry.
Q-TORQ PRODUCTS are fully guaranteed against faulty materials & workmanship
Should they be found to be defective, they will either be repaired or replaced free of charge
(fair wear and tear and/or misuse excepted).
Please retain supplier invoice as proof of purchase.
All
Q-TORQ
tools are supplied with a calibration certificate valid for 12 months from date of
purchase. (Please retain invoice as proof of purchase.)
Accuracy: = ± 6% of the reading within the effective working
range of the tool. *
*
ISO6789: 1992
states the effective working range of the
tool is from 20% to 100% of its maximum torque value.
You have purchased a
Q-TORQ
product that is designed for high performance and a long service
life. If safety and maintenance procedures are followed and the tool is used correctly it will last
for many years.
SAFETY & MAINTENANCE
Always follow instructions for assembly before operation.
Ensure your workpiece is firmly held or fixed before commencing work.
When using torque tools it is possible that fasteners may break or slip. Always stand with
both feet on the floor and avoid applying torque in awkward positions.
The drive part of the tool and any accessories should always be in line with the fastener.
Misalignment and uncontrolled movement will affect accuracy.
Only use the tool on the job that it has been designed for.
Keep the tool clean by wiping. Never dip in cleaning fluid.
Always store tools away from dirt, oil and swarf as this can damage mechanisms.
We recommend that your torque tool be calibrated annually.
RECOMMENDED CALIBRATION SERVICE PROVIDER
CROMWELL METROLOGY
Telephone: 0116 257 2338
Fax: 0116 288 8843
Email:
www.cromwell.co.uk
Remove the end cap by turning
counterclockwise with a hex
wrench.
Position torque key onto the
adjustment locking device
inside driver.
Use an appropriate torque
analyzer to set torque. When
torque value required is
reached, repeat five more
torque motions to verify torque
setting.
Re-install end cap
Adjust torque by applying axial
force to key before and whilst
rotating the screw.
To increase torque, turn key
clockwise. To decrease torque,
turn key counterclockwise.
Apply torque with a smooth consistent motion parallel to fastener
axis. The wrench ‘slips’ when predetermined torque setting is
reached - completely eliminating overtightening.
1
4
2
3
5
6
((( )))
SPECIFICATIONS
Model
Order Code
Range (ISO)
Range (Imperial)
Length
Ratchet
TPW25
KEN-555-4100K
3 - 25 N.m
2 - 18 lbf.in
216mm (8
1/2
”)
1/4
”
SPW25
KEN-555-4050K
3 - 25 N.m
2 - 18 lbf.in
216mm (8
1/2
”)
3/8
”
SPW55
KEN-555-4070K
15 - 55 N.m
10 - 40 lbf.in
324mm (12
3/4
”)
3/8
”
MPW125
KEN-555-4000K
40 - 125 N.m
30 - 90 lbf.in
460mm (18
1/4
”)
1/2
”
CONTENTS
A Calbration Certificate
that is
traceable to International
Standards and valid for 12
months from date of purchase.
(Please retain invoice as proof of
purchase).
A Torque
Key
For
adjusting
the torque