Qstarz SOLAR Travel Recorder BT-QI 200 Ultra, Руководство пользователя

Страница: 10 / 52

BT ‐ Q1200 Ultra Super 51 ‐ CH GPS Travel Recorder
®
.............................................................................................................................................................................................................................................
Beyond Navigation
8
5 ‐ 6. Function of Auto On ‐ Off (Power saving mode)
BT ‐ Q1200Ultra supports Auto On ‐ Off (Power saving mode). It can automatically
enter sleeping mode after the Bluetooth connectivity is turned off, so the Blue LED
will turn to flash every 5 seconds. Thus you can always power it on with very low
power consumption.
Under power saving mode, when detecting Bluetooth is being connected,
BT ‐ Q1200Ultra will auto wake up itself and the blue LED will turn to flash every 2
seconds and GPS Orange LED will be also On.
Note: Power saving mode would not function when log is enabled.
6. Setup BT ‐ Q1200Ultra
6 ‐ 1. Install the driver and software utility for BT ‐ Q1200Ultra
System Requirement (Only compatible with Microsoft Windows XP / Vista)
Minimum System Requirement Recommended System Requirement
‐ Windows XP or Vista
‐ Pentium 3, 500Mhz
‐ 128M RAM
‐ 128MB disk space
‐ Network speed: 128Kbits/sec
‐ 3D ‐ capable video card with
16Mbytes of VRAM
‐ 800x600, "16 ‐ bit High Color" screen
‐ Windows XP
‐ Pentium 4 2.4GHz+ or AMD
‐ 512M RAM
‐ 2 GB of free disk space
‐ Network speed: 768 Kbits/sec or
better (DSL/Cable)
‐ 3D ‐ capable video card with 32 MB of
VRAM or greater
‐ 1280x1024, "32 ‐ bit True Color" screen