GPS Lap Timer COLOR
English
……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………………………………………………………………………………………. ……………………………………………………………………………………………………
www.Qstarz .com
5
D. LED Signal definition
LED
Red
1.
When the memory is full or fail to read/write memory, the Red LED will flash
once per 3 seconds.
2.
When the battery is in low status below 15%, Red LED will flash once per 3
seconds. When low below 5%, Red LED will be steady ON for alert.
Orange
When device is under charging mode, the Orange LED will be steady ON. When
device battery is fully charged, the Orange LED will be OFF.
Green
When device is under Screen power saving mode (backlight off), Green LED will
flash once per 3 seconds.
E. Safety Notice
Note: Please read this section carefully before start operating the LT-Q6000.
Keep the LT-Q6000 far from heat or high temperature environment. We recommend not to expose
your LT-Q6000 in temperature higher than 145
℉
/60
℃
to prevent the device from overheating,
exploding or melting itself.
When car interior temperature is too high, is likely to result in product failure or damage. When
device is not in use or driver leaves the car, we suggest disconnecting the device and place in the car
glove box.
To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
Do not mount the devices in a place where the driver or passengers may receive injury during vehicle
operation or collision. For your safety, take care to route all cables away from shifters, pedals,
accessory controls and mechanisms
The manufacturer assumes no responsibility for any damages and loss resulting from the use of this
manual, or from deletion of data as a result of malfunction, dead battery, or from misuse of the
