19
connector, jack, and internal electronic circuit board. This will cause
non-recoverable damage to the product.
- Please do not leave alone the BT-Q800 in hot area. High temperature can
shorten the life of electronic devices, and melt or drape certain plastics.
- Please do not expose your BT-Q800 to temperature higher than 185
℉
(85
℃
)to prevent any accidents which might damage the rechargeable battery
at high temperature. Also, do not leave your BT-Q800 in your car under
direct sunlight while not in use.
- Do not store the BT-Q800 in cold environment. Otherwise when the unit
warms up to its normal operational temperature, moisture can severely
damaging the mini circuit boards inside.
- Do not attempt to open the BT-Q800 yourself. Unauthorized hacking may
damage the unit, and void your warranty.
Appendix H. FCC Notices
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interface, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
FCC RF Exposure requirements:
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter
.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHOURIZED
MODIFICATION TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
Appendix I. IC Caution
The installer of this radio equipment must ensure that the antenna is
located or pointed such that it does not emit RF field in excess of Health
Canada limits for the general population; consult Safety Code 6,
obtainable from Health Canada's website.
"www.hc-sc.gc.ca/rab"
