THIS UNIT IS EQUIPPED WITH A LOW VOLTAGE CUTOFF & MAY STOP MID-CYCLE.
IF THIS HAPPENS HERE IS HOW TO COMPLETE THE CYCLE PRIOR TO CHARGING:
REMOVE (5) 8-32 SCREWS FROM THE LOWER BATTERY COVER
1.
LOCATE THE LOW VOLTAGE CUTOFF ON TOP OF THE CENTERMOST BATTERY
2.
CHECK THAT THE LOW VOLTAGE CUTOFF HAS A RED LIGHT ON
3.
IF THE SWITCH HAS A RED LIGHT, MOVE THE ROCKER TO THE "ON" POSITION
4.
CHECK TO SEE THAT THE RED LIGHT HAS TURNED GREEN
5.
COMPLETE CYCLE, AND LOWER FORK TO BOTTOM
6.
MOVE ROCKER BACK TO "AUTO" & VALIDATE RED LIGHT HAS REAPPEARED
7.
REPLACE BATTERY COVER & CHARGE
8.
LM-200-R2 INSTALLATION &
ASSEMBLY INSTRUCTION
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
QSP. ANY REPRODUCTION IN PART OR AS
A WHOLE WITHOUT THE WRITTEN
PERMISSION OF QSP IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
5
