16
PROW
05/2016
english
10 Technical data
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi
ed could result in less sheet capacity and increased noise during oper-
ation. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
Cutting type
Strip cut
Cross cut
Cut size
(mm)
5.8
3.9
4.5 x 30
Security level
DIN 66399
P-2 / O-2 / T-2 / E-2
P-2 / O-2 / T-2 / E-2
P-4 / O-3 / T-4 / E-3
F-1
Cutting capacity *
(sheets), A4
80 g/m
2
70
g/m
2
35 - 37
39 - 41
26 - 28
29 - 31
21 - 22
25 - 27
Weight
50 kg
56 kg
Cutting speed
70 mm/s
60 mm/s
Intake width
400 mm
Power supply
230 V, 50 Hz
120 V, 60 Hz
220 V, 60 Hz
Power consumption
with max. number of sheets
590 W
Operating mode
Continuous operation
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Size
W x D x H (mm)
620 x 487 x 889
Shredded material container volume
145 litres
Sound pressure level emissions
(Idle running/ load)
56 dB(A) / 59-63 dB(A)
EU declaration of conformity
Product:
Document shredder
Machine types:
PROW
The manufacturer,
HSM GmbH + Co. KG
, Austraße 1 - 9, 88699 Frickingen / Germany, hereby declares under its sole responsibility
that the products described above comply with the applicable harmonisation legislation of the European Union:
Low Voltage directive 2014/35/EU, EMC directive 2014/30/EU, RoHS directive 2011/65/EU
Related standards:
▪
EN 55014-1:2006 +A1:2009 +A2:2011
▪
EN 55014-2:1997 +A1:2001 +A2:2008
▪
EN 61000-3-2:2006 +A1:2009 +A2:2009
▪
EN 61000-3-3:2013
▪
EN 62233:2008
▪
EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +AC:2011 +A2:2013
Signed for and on behalf of: HSM GmbH + Co. KG
Frickingen, 21.4.2016
ppa. Hubert Kötzinger - Chief Technical Of
fi
cer (CTO)
