QShred QS-Pro, Руководство по эксплуатации

Страница: 8 / 12

8
QS-Pro
11/2014
QS-Pro
9 Disposal / Recycling
Electrical and electronic old de-
vices contain a variety of valuable
materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
10 Technical data
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
Cutting type Cross cut
Shred size (mm) 3.9 x 50 1.9 x 15
Sa fe ty ra ting DIN 66399 P-3 / O-2 / T-3 / E-2 P-5 / O-4 / T-5 / E-4 / F-2
Cutting ca pa ci ty * (sheets), DIN A4 70 g/m 2
80 g/m 2
38 - 40
33 - 35 26 - 28
20 - 22
Cutting speed 110 mm/s
Weight 82 kg
Noise level (Idle running / load) 60 dB(A) / 75 dB(A)
Lo ading width 400 mm
Voltage 230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
Power for the maximum number of sheets 2 100 W
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL) -10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Dimensions W x D x H (mm) 595 x 470 x 990
Volume of shredded material bag 146 l