OPERATION:
IMAGE CAPTURE:
The pen features a high-capacity rechargeable lithium polymer battery. This form of battery does
not have a “
memory
” effect meaning that it can be recharged at any time without loss of capacity.
However, it is recommended that you fully charge the battery and then use the camera normally until
it is fully discharged before recharging.
Cycling the battery
in this manner for the first five times will
ensure maximum battery capacity and operation time.
When charging the battery – whether using the included charger, or plugged into an active USB port
– the
status light
will flash yellow/amber until the battery is fully charged. During the first few uses,
allow the pen to continue charging for an hour after the light stops flashing.
1.
Move
the mode switch to the right side (use the pen’s tip if needed).
2.
Press
the Operation Button 3 seconds. The status indicator light will illuminate
amber and blue light, then turn amber to indicate that the pen is ready to
take photo.
3.
Press
once on the operation button to take a picture the status indicator light
will darken to indicate that picture is being recorded. When it illuminates again,
the camera ready to take another picture.
4. To turn off the camera,
press and hold
the operation button until the status
indicator light goes off. The camera will automatically turn off after a few
minutes of inactivity.
5
6
