background image

EN

2

IMPORTANT SAFETY PRECAUTIONS

Install in accordance with QSC

, LLC

  instructions and under the supervision of a licensed Professional Engineer.

WARNING!

Before placing, installing, rigging, or suspending any speaker product, inspect all hardware, suspension, cabinets, transducers, brackets and

 

associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the strength of

 

the installation, placement or array. Any such condition severely reduces the safety of the installation and should be immediately corrected.

 

Use only hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected overloading. Never

 

exceed the rating of the hardware or equipment.

Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national regulations

 

regarding the safety and operation of suspended equipment are understood and adhered to.

Warranty (USA only; other countries, see your dealer or distributor)

Disclaimer

QSC, LLC is not liable for any damage to amplifiers or any other equipment that is caused by negligence or improper installation 
and/or use of this loudspeaker product. 

QSC Audio Products 3 Year Limited Warranty

QSC, LLC (“QSC”) guarantees its products to be free from defective material and / or workmanship for a period of three (3) years from 
date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under 
normal installation and use - provided the unit is returned to our factory or one of our authorized service stations via prepaid trans-
portation with a copy of proof of purchase (i.e., sales receipt).

 

This warranty provides that the examination of the return product must 

indicate, in our judgment, a manufacturing defect.

 

This warranty does not extend to any product which has been subjected to misuse, 

neglect, accident, improper installation, or where the date code has been removed or defaced. QSC shall not be liable for incidental and/
or consequential damages.

 

This warranty gives you specific legal rights. This limited warranty is freely transferable during the term of the 

warranty period.

Customer may have additional rights, which vary from state to state.

In the event that this product was manufactured for export and sale outside of the United States or its territories, then this limited war-
ranty shall not apply. Removal of the serial number on this product, or purchase of this product from an unauthorized dealer, will void this 
limited warranty.

Periodically, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please visit www.qscaudio.com. 

Contact us at 800-854-4079 or visit our website at www.qsc

.

com.

© 

Copyright 2017, QSC, LLC

QSC® is a registered trademark of QSC, LLC

Speakon

® 

is a registered trademark of Neutrik® and the names of Neutrik® products referenced herein are either trademarks and/or service marks of Neutrik®.

All trademarks are the property of their respective owners.

“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office

Содержание WL3082





















Отзывы: