5
Installation
Prepare Ceiling
Refer to Figure 3.
1. Use the template provided to mark and cut a hole (1) in the ceiling where the loudspeaker is to be installed. For frame-construction ceiling, skip to “Wire the Loudspeakers”.
2. Install two telescoping tile rails (2), one on each side of the hole and supported by the suspended-ceiling support rails (3).
3. Install the C-ring (4) over the hole using the tile-rails as support. Make sure the clips on the C-ring are properly fitted over the tile-rail.
4. Use the tile rail screws (5) to secure the C-ring to the tile-rails.
IMPORTANT!
If tile rail screws are not used, unwanted sag to the tile may occur.
1
2
3
4
5
— Figure 3 —
