9
TD-001541-01-B
System Status
Refer to Figure 10
• Firmware – A three-section number identifying the major release, minor
release, and maintenance release. For example, 5.0.06.
• Temp – The current chassis temperature of the Core.
◦
Compromised threshold = 60°
C
◦
Fault threshold = 70°
C
• Fan Speed – This number varies with the temperature.
LAN A
Refer to Figure 11
You can edit this information in the Q-SYS Configurator.
• Static or Auto – Displays next to LAN A, indicates if the Core's IP
Address is Static or Automatic.
• IP Address – The IP Address assigned to the Core's LAN A. LAN A is the
primary Q-LAN connection to the Core, and is required.
• Net Mask – The Net Mask assigned to the Core.
• Gateway – The Gateway assigned to the Core.
LAN B
LAN B is used for redundancy, and is not required. The information is the same as LAN A.
Input / Flex In Channels Status
Refer to Figure 12 (Flex Input screen shown)
ROOE!:
If a Flex channel is set to Input, there is no
information shown under the same channel on the Flex Out
screen. If the Flex channel is set to output, there is no
information for that channel on the Flex In screen. Compare
Figure 12 and Figure 13.
The Input and Flex Input screens show the Mute, Clip, Signal, and +48V
(phantom power) for the eight Mic/Line input channels.
• Mute – Displays a "muted loudspeaker" when the channel is muted.
• Clip – Displays a solid circle under the channel having an input signal that is overdriving the associated channel input.
• Signal – Displays a solid circle when there is a signal present on the associated channel.
• +48V – Displays a solid circle when the phantom power is turned on for the associated channel.
Output / Flex Out Channels Status
Refer to Figure 13 (Flex Output screen shown)
The Output and Flex Output screens show the Mute, Clip, and Signal, for
the eight Mic/Line output channels.
• Mute – Displays a "muted loudspeaker" when the channel is muted.
• Clip – Displays a solid circle under the channel having an output signal
over driving the associated channel output.
• Signal – Displays a solid circle when there is a signal present on the
associated channel.
— Figure 10 —
FIRMWARE:
TEMP:
FAN SPEED:
SYSTEM STATUS
<firmware number>
<temperature in Celsius >
<fan speed in rpm>
— Figure 11 —
IP ADDRESS:
NET MASK:
GATEWAY:
LAN A (STATIC)
<IP Address of the Core>
<Net Mask of the Core >
<Gateway for the Core>
— Figure 12 —
Flex In
Mute
Clip
Signal
+48V
1
2
3
4
5
6
7
8
— Figure 13 —
Flex Out
Mute
Clip
Signal
1
2
3
4
5
6
7
8
