4
EN
If trouble is experienced with this equipment US:6M2BR00BCORE110F, for repair or warranty information, please contact QSC, LLC
1675 MacArthur Boulevard, Costa Mesa, CA 92626-1468 U.S. 714.754.6175. If the equipment is causing harm to the telephone
network, the telephone company may request that you disconnect the equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or
corporation commission for information.
Electrical Safety Advisory:
Parties responsible for equipment requiring AC power should consider including an advisory notice in their customer information
suggesting the customer use a surge arrestor. Telephone companies report that electrical surges, typically lightning transients, are very
destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem.
Industry Canada
This product meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number (REN=0.1) indicates the maximum number of devices allowed to be connected to a telephone
interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of
the RENs of all the devices not exceed five. / L’indice d’équivalence de la sonnerie (IES=0.1) sert à indiquer le nombre maximal de
terminaux qui peuvent être raccordés à une interface téléphonique. La terminaison d’une interface peut consister en une combinaison
quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs n’excède
pas cinq.
IMPORTANT!:
The product is not intended to be installed as a system for providing emergency voice communication or
to be installed in areas specified by ANSI/NFPA 72, "National Fire Alarm Code."
RoHS STATEMENT
The QSC Q-SYS Core 110 Series is in compliance with European Directive 2011/65/EU – Restriction of Hazardous
Substances (RoHS2).
The QSC Q-SYS Core 110 Series is in compliance with “China RoHS” directives. The following chart is provided for product use in China and
its territories:
QSC
Q-SYS Core 110 Series
部件名称
(Part Name)
有害物质
(Hazardous Substances)
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(vi))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
电路板组件
(PCB Assemblies)
X
O
O
O
O
O
机壳装配件
(Chassis
Assemblies)
X
O
O
O
O
O
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
（目前由于技术或经济的
原因暂时无法实现替代或减量化。）
This table is prepared following the requirement of SJ/T 11364.
O: Indicates that the concentration of the substance in all homogeneous materials of the part is below the relevant
threshold specified in GB/T 26572.
X: Indicates that the concentration of the substance in at least one of all homogeneous materials of the part is
above the relevant threshold specified in GB/T 26572.
(Replacement and reduction of content cannot be achieved currently because of the technical or economic reason.)
