4
Attaching a Loudspeaker to the Array Frame
1. Hang both Front Strikes of the loudspeaker onto the Front Hooks of the Array Frame. (See — Figure 5 —)
2. Lift rear handles of the loudspeaker until the Angle Bar reaches the Array Frame. Secure the loudspeaker Angle Bars to the Array
Frame with the Array Frame Rigging Pins on both sides. (See — Figure 6 —)
WARNING!:
Both rigging pins must be used to safely secure the loudspeaker to the array frame. Never use only one pin!
— Figure 5 —
— Figure 6 —
Array Frame
Rigging Pin
Detaching a Loudspeaker from the Array Frame
1. Support the weight of the loudspeaker. Remove the Array Frame Rigging Pins on both sides. (See — Figure 7 —)
2. Lower loudspeaker carefully using rear handles. Loudspeaker remains suspended on Front Strikes.
3. Lift loudspeaker off of Array Frame Front Hooks to fully detach. (See — Figure 8 —)
— Figure 7 —
— Figure 8 —
Array Frame
Rigging Pin
Pick-Point Deployments
Single Pick-Point Deployment
For single pick-point deployments, a 16 mm (5/8 inches) shackle (not included) can be attached
to the center rail of the Array Frame at the center-of-gravity (CG) point for the desired angle.
(See — Figure 9 —)
The tilt angle of the array can be adjusted by moving the pick-points
forward or backward. (See — Figure 10 —)
— Figure 9 —
— Figure 10 —
