3
Install K Series M10 KIT in Integrated Suspension Points
The K Series M10 kit is sold separately and available from QSC Audio.
WARNRNG!:
A single KLA array can consist of a maximum of two KLA181, or five KLA12, or two KLA181 and five KLA12
loudspeakers. The weight of any single array shall not exceed 480 lbs. (218 kg).
1. Remove the rubber plug
Figure 4
(1)
.
2. Install three washers
Figure 4
(2)
and three eyebolts
Figure 4
(3)
. Tighten until snug.
3. Continue to rotate the eyebolts until they reach the desired position. Do not overtighten.
4. Suspend the array from the suspension structure using an appropriate sling, cable, etc.
Other KLA12 Deployment
In addition to the M10 rigging listed above, you can use a KLA AF12 array frame to suspend an array
(Figure 5)
, you can deploy a single KLA12
loudspeaker on stage for front fill or lip fill applications
(Figure 6)
, you can pole-mount up to two KLA12s on a loudspeaker stand
(Figure 7)
or over a
KLA181 or KW181
(Figure 8)
.
— Figure 4 —
1
2
3
— Figure 5 —
— Figure 6 —
0˚
— Figure 7 —
-9˚
0˚
— Figure 8 —
Max pole length
36 inches
(914 mm)
