QSC ILA System v2, Руководство пользователя

Страница: 3 / 20

1 2
Introduction
The Installation Line Array (ILA) is a high performance line array system designed for the needs of Houses of Worship, Performing Arts facilities and a
multitude of other venue types. The current ILA family is composed of the WL2082-i line array element, WL118-sw subwoofer, FB2082-i array frame,
PB2082-i pull-back bar, EB2082-i extension bar, and GS115-sw ground stack kit.
Installation Line Arrays may be used in outdoor applications where the system is somewhat protected from the elements. The enclosure material is
formulated with UV inhibitors, the grille is made of aluminum and the woofer cones are weather resistant.
WL2082-i
The WL2082-i line array element uses two high-power, neodymium magnet, 2
"
voice-coil, 8
"
low-frequency drivers in a two-and-a-half-way configura-
tion. Both woofers produce low frequencies but only one covers the mid-range, resulting in far better horizontal directivity control in the crossover
region. Excellent high-frequency output and clarity are provided by a pair of 1.75
"
voice coil, neodymium magnet compression drivers with titanium
diaphragms. These drivers are mounted to QSC’s patented* multiple-aperture diffraction waveguide that provides an extremely wide horizontal cover-
age of 140º. As a result, systems will rarely require side or center fill speakers and solid stereo imaging is preserved across the listening area.
The low-frequency capability of a WL2082-i array extends to 68 Hz (-10 dB); adequate for speech/vocal and acoustic music program material. For
reinforcement of program material with more demanding low-frequency content, the WL118-sw companion subwoofer is available.
WL2082-i Loudspeaker
Rigging plate attachment holes 1.
Grille 2.
Splay angle selection holes (rear of rigging plates) 3.
Grille retaining screws (one on each end of enclosure) 4.
Rigging plate retaining bolt 5.
Rigging alignment notch 6.
Rigging plates 7.
Input plate 8.
Rigging alignment pin 9.
Horizontal Shading selector switch 10.
BI AMP/TRI AMP Mode selector switch 11.
Wiring table 12.
NL8 Speakon™ connectors 13.
1
2
3
4
5
7
6
8
9
10
11
12
13
*Patent number 7,177,437