Connections
HF INPUT Terminals
The HF-63 has barrier strip screw terminals that accept up to #10 AWG (5.3mm
2
) stranded loudspeaker wire. Connect the amplifier’s
high frequency output signal to the loudspeaker’s
HF INPUT
terminals. Observe proper polarity; amplifier’s
+
signal to loudspeaker
+
HF INPUT
, amplifier’s
-
signal to loudspeaker -
HF INPUT
. Use the largest wire size and shortest wire length for the application.
NOTE! Maintain proper loudspeaker connection polarity throughout the entire system for maximum performance.
Do not apply full range signal to the HF-63! There is no crossover in the HF-63, only an equalization and protection
network. All required signal processing must be done before the signal is applied to the HF-63.
HF OUTPUT Terminals
The
HF OUTPUT
terminals are factory-connected to the compression driver. These terminals should
ONLY
be connected to the HF-63’s
compression driver.
Compression
Driver
Amplifier
Processed high
frequency pro-
gram signal
QSC DCM or other
active crossover
