Attero Tech by QSC
Synapse D32o
User Manual
QSC, LLC 2020
614-00049
2 – Device Installation
2.1 – Mounting
The case for the D32o is designed ready to fit in a standard 19”
rack. The rack mount tabs are built in to the front panel of the
unit (rack screws are not supplied). Use four screws to secure
the unit to the rack. Dimensioned drawings can be downloaded
from the Documents section of the
Figure 1 – Mounting and Dimension Information
2.2 – Audio Connections
All connections to the Synapse D32o should be made before the
power is applied. Attach audio destinations to the analog audio
outputs. The analog audio outputs are balanced, so be sure to
check what input type the destination device uses in order to
find how to connect it correctly. Refer to the following diagrams
and instructions for connecting different types of audio devices.
2.2.1 – Balanced Output to Balanced Input
+
-
3-Wire Cable
Pin 1
Pin 2
GND
Balanced Output
Terminal Block Plug
Pin 3
1
2
3
XLR-M
+
-
3-Wire Cable
Sleeve
Tip
GND
Ring
1
2
3
TRS Plug
Balanced Output
Terminal Block Plug
Figure 2 – Balanced Wiring Guide
2.2.2 – Balanced Output to Unbalanced
Input
Balanced Output
Terminal Block Plug
2-Wire Cable
Sleeve
Tip
TS Plug
Balanced Output
Terminal Block Plug
+
-
2-Wire Cable
Sleeve
Tip
RCA Plug
GND
+
-
GND
Figure 3 – Unbalanced Wiring Guide
