Attero Tech by QSC
unIFY Control Panel
unD3IO Configuration
QSC, LLC 2020
Input Select Control
*Note:
The unD3IO has two Dante™ transmit channels. The first is connected to the XLR input. The second
is a mono sum of the selected stereo line level input(s).
The unD3IO features an input selection option for the line level analog inputs routed to the second Dante™
transmitter channel. Using option
A
selects the mono mix of the two RCA inputs. Using option
B
selects the
mono mix of the two stereo jack inputs and using option
A+B
selects options A and B mixed together.
Dante™ TX Channel Status
This text field reports the number of active Dante™ receive devices for the corresponding transmitter channel.
If no devices are subscribed to the transmitter channel the text field will report
None
.
*Note:
This is a read-only field and any channel routing configuration must be performed within Dante™
Controller
Outputs
Dante™ RX Channel Name
This text field reports the Dante™ receive channel name shown on the
Dante™ network for corresponding analog output channels.
*Note:
This field is non-editable. To edit the channel names, use the
device list view control or use Dante™ Controller.
RX Channel Assignment
This text field reports the currently assigned Dante™ transmit channel to
the corresponding receive channel. If no channel is assigned, the text field
will report
None
.
*Note:
This field is non-editable. To edit the channel names, use the device list view control or use Dante™
Controller.
