Qsan Technology XCubeSAN XS5224D, Руководство по оборудованию

Страница: 128 / 143

108 ©
Copyright 2021 QSAN Technology, Inc. All Right Reserved.
Figure 6-17 Example of a Failed Port on the 10GbE iSCSI Host Card
The following content and images are detailed steps of removing a host card from the
system.

Remove the controller module first. For detailed steps of removing a controller module;
please refer to the chapter 6.1, Removing / Installing the Controller Module section.

Press the host card release button and disconnect the host card with the connector in
the controller cage.

Pull the host card out until it is free from the controller cage.
 Install the substitute host card. The detailed steps of installing a host card; please refer
to the chapter 3.3,
Installing the Optional Host Cards section.
 Install the dummy host card cage in the empty host card slot and tighten two screws.

Repeat the procedures above if there are other host cards need to be removed.
 To ensure the system cooling, please install all dummy host adapter card cages if host
cards are removed.
Figure 6-18 Procedures of Removing the Host Card from the Controller Cage