www.qrsmusic.com
QRS Music Technologies, Inc.
800-247-6557
The QRS Q36
Active Speaker
Installation Manual
H.Q. 40 Watts RMS, Class A/B Amplified Speaker System
QRS Catalog #: 76240
m
an0322Q36
Once the Q36 front mount is attached, set the Q36 onto the front mount with the Q36 front mount stud in front
of the mount.
Center the Q36 on the front mount and slide toward the mount.
When the Q36 mount stud enters the slot continue to move the unit back until the stud reaches the end of the
slot.
Move the rear of the Q36 unit upward toward the soundboard.
As the Q36 pivots on the front mount keep the mount stud pulled into the slot. When you have the Q36
positioned at the desired angle pre-drill and
add a #8 screw and washer at mid point in the rear mount arm slot.
At this stage the Q36 can still be rotated if needed. You may want to let the system play as you walk
around the piano and make any last position adjustments based on what you hear. When you have the
Q36 positioned how you like it, add the final rear mount arm screw thru the hole. This will lock the position
in permanently.
Please note:
The Q36
audio system has been
designed with a coaxial
driver configuration and
the drivers are in open
air for unimpeded sound
performance. Avoid
grabbing the Q36 by the
front drivers. Use care not
to damage the drivers
with tools or by careless
handling.
Q36 Transparent View
Q36 mount stud
engaged into
mount slot
Add this screw first and verify angle
before adding 2nd screw.
Содержание Q36
Страница 8: ......
