QRPworks
Stay Tuned
Manual rev 1.0 Page 8 of 8
Whenever the SWR passes thought 2:1, a beep will be heard in addition
to the SWR dependent tone. This is especially useful to sight impaired
users and allows users to know when the SWR is below 2:1.
The audio tone has third important function. In either the VSWR or
Power Meter mode, it emits a harsh warning tone if you exceed 15W
applied to the meter, indicating the power needs to be reduced.
You can adjust the volume of the tome using the volume control on the
side of
Stay Tuned
.
If you’d like to turn the audio off, slide the speaker switch, located to the
left of the ANT BNC connector to the left, towards the left edge of Stay
Tuned.
Use for Normal Transmitting & Receiving
Switch Positions:
o
OFF
– PASS THRU
o
PWR
– D.L. or VSWR–ANT
Switch
Stay Tuned
off for normal transmitting and receiving.
In the
OFF
– PASS THRU
position, power is off, no sound will be heard,
and the device is in a pass-thru mode.
There is no need to physically remove
Stay Tuned
from the
transmission circuit when it is off.
