QRP Labs Si5351A Скачать руководство пользователя страница 12

Страница: 12 / 13

4. Resources

Please see the kit page

http://www.qrp-labs.com/vfo

for information on latest updates and issues.

Please join the Yahoo group

http://groups.yahoo.com/group/qrplabs/

for new kit announcements, to

discuss any problems with the kit, enhancements you’ve made, or just to tell everyone how much fun
you’re having.

5. Version History

19-Jan-2016



Initial version, for firmware version s1.00

04-Apr-2016



Firmware version s1.01

– only change is to remove the 10MHz limit on IF offset



Clarification of operation without GPS, in the GPS settings description, top of page 7

11-Nov-2016



Firmware version s1.02



Add negative IF offset capability



Added a long list of new #-tags to display data from the GPS module, when the serial data line

is connected.



Added multiple scrolling customisable display feature, with configurable pause on each item

(Line 1 Pause, Line 2 Pause etc. parameters)



If the #RF tag is in the display (reference frequency) and GPS discipline is used, it is updated

every 1 second with the new value



Add the #HB tag to display the heartbeat in the display, which beats in time with the GPS 1pps



Changed “Cont. correction” parameter to “Corr. threshold”, it now allows recalculates the VFO
when the reference frequency has changed by the specified amount. Continuous correction
can be achieved by setting 0.



Improvement to the GPS discipline at power-

up. The calibration starts off in “fine” mode, only

moving to “coarse mode” if necessary after 10 seconds. This avoids a large frequency jump at
power up.



Extended display support to 2- or 4-rows, and 16, 20, 24 or 40 columns (defined via new

configuration parameters “LCD Rows” and “LCD Cols”)

Содержание Si5351A














Результаты поиска

Содержание Si5351A

Отзывы:

Похожие инструкции для Si5351A

Бренды по названию

Популярные бренды

QRP Labs Si5351A, Руководство по эксплуатации

Результаты поиска

Содержание Si5351A

Отзывы:

Похожие инструкции для Si5351A

Бренды по названию

Популярные бренды