QRP Labs ProgRock2, Руководство пользователя

Страница: 11 / 19

These commands are similar as used for Modem Manager service.
Terminal emulator
I use Linux (XUbuntu 18.04) and I’m using the PuTTY terminal emulator. There are numerous
other terminal applications which will work fine. You may have your own favourite. They are all
capable of correct operation with ProgRock2.
I start PuTTY using command line “sudo putty” then connect to ProgRock2 on /dev/ttyACM0. It is
necessary to know which serial port is being used by ProgRock2. There is also a guide to
identifying the serial port at
http://qrp-labs.com/qlg2 (scroll down the page).
Note that only one PC application at a time can connect to Virtual COM Serial ports.
Set the size of the terminal window to 80 columns and 24 rows.
When you click “Connect”, a blank screen should be displayed. Now press the ENTER key, to
enter the ProgRock2 configuration utility.
Configuration utility
The single screen configuration utility for ProgRock is very minimal, due to the resource
constraints of the microcontroller. It looks like this:
ProgRock2 manual 1.00b
11