qpcom QP-W4400NUSB, Руководство пользователя

Страница: 15 / 27

Install Driver/Utility
-15-
6 Wireless Network Configuration
WLAN adapter uses its own management software. All functions controlled by users are
provided by this application. When you insert the WLAN Adapter into your laptop or desktop, a icon
should appear in the Windows System Tray automatically.
6.1 Utility Icon
q
Client mode utility running but no WLAN Adapter plugged.
q Client mode utility running and WLAN Adapter scan available network.
q Client mode utility running and WLAN Adapter can not scan any AP.
6.2 Client Mode (Default Setting)
6.2.1 Wireless Device Control
§ Show Tray Icon – Show icon or not show icon in systray.
§ Radio Off – Stop wireless signal.
§ Disable Adapter – Stop wireless device.
6.2.2 GENERAL SETTING
Once device is set, double click on that icon and the configuration window will pop up as shown. It
shows the current connected network. The signal strength and link quality are displayed also. The
bar graph displays the quality and strength of the link between the node and its Access Point. Link
Quality is a measurement of receiving and transmitting performances over the radio.
Network Address displays current MAC Address, IP Address, Subnet. and Gateway.
Click Renew IP button to refresh IP address leased from wireless AP.